Where can 430 stainless steel manufacturers buy?

Cold-rolled sheets are steel coils that have been hot-rolled at high temperature and then finished rolling in a cold-rolling plant. Generally, the thickness of hot-rolled sheet is above 3.0MM. And its surface is NO.1, that is, the surface is white and non-reflective. Cold-rolled coils with a thickness of less than 3.0MM are generally rolled by cold-rolling mills (the rolling temperature of cold-rolling mills generally does not exceed 80 degrees. Moreover, they are cooled by rolling oil, annealed and pickled, and become 2D\2B\NO after other processes. .3 and so on. Its surface features are. Bright and reflective. Cold-rolled sheets have a uniform thickness relative to hot-rolled sheets.

430 stainless steel hot-rolled sheet is a kind of steel and cold-rolled sheet is two completely different concepts. Cold rolled sheet refers to a state of stainless steel. 430 is a chromium-based stainless steel, also known as 400 series stainless steel.

430 stainless steel plate can be heat treated.

Commonly used heat treatment processes for 430 stainless steel plates include: solution treatment, stabilization treatment and stress relief treatment.

430 stainless steel plate is used for architectural decoration, fuel burner parts, household appliances, and home appliance parts. 430F is a steel grade with free cutting properties added to 430 steel, which is mainly used for automatic lathes, bolts and nuts.

430 stainless steel is a ferritic stainless steel, which theoretically retains ferrite at any temperature. Therefore, the main heat treatment process of ferritic stainless steel is annealing. This annealing is usually quenched from a high temperature, when ferritic stainless steels can achieve maximum ductility and toughness and corrosion. When 430 stainless steel is rapidly cooled from above 925 degrees, 30% of austenite may be transformed into martensite, thus becoming brittle. If it is quenched from above 1095 degrees, it can be corrected by heating to 760~815 degrees. Therefore, it is generally annealed between 760 and 815 degrees.

430 stainless steel thermal conductivity?

430 stainless steel is below 600℃, and the thermal conductivity of various stainless steels is basically in the range of 10~30W/(m•℃), and the thermal conductivity tends to increase with the increase of temperature. At 100°C,

The order of thermal conductivity of stainless steel from large to small is 1Cr17, 00Cr12, 2 Cr 25N, 0 Cr 18Ni11Ti, 0 Cr 18 Ni 9, 0 Cr 17 Ni 12Mο2, 2 Cr

25Ni20. The order of thermal conductivity at 500℃ is 1 Cr 13, 1 Cr 17, 2 Cr 25N, 0 Cr 17Ni12Mο2, 0 Cr 18Ni9Ti and 2 Cr 25Ni20. The thermal conductivity of austenitic stainless steel is slightly lower than that of other stainless steels. Compared with ordinary carbon steel, the thermal conductivity of austenitic stainless steel at 100 °C is about 1/4.