Before understanding how mirror stainless steel plates can be used as elevator decorative panels, let’s first understand what kind of stainless steel plates can be called mirror stainless steel plates.

People who have a certain understanding of mirror stainless steel plates will know that the production principle of mirror stainless steel plates is to polish the stainless steel plate raw materials through polishing equipment with abrasive slurry to make the stainless steel plate surface smoother and smoother. The brightness can be as clear as a mirror. The processing of mirror stainless steel plates can be divided into two processing methods: general grinding and fine grinding. So which stainless steel plate produced by these two processing techniques will have a better mirror effect? This depends on looking at The brightness of the surface of the mirror stainless steel plate is used to judge. The most important point is that the surface of the stainless steel plate must have fewer polishing marks and blisters. Generally speaking, when a stainless steel plate is processed with polishing equipment, the slower it travels, the more groups it needs to grind, so the stainless steel plate processed in this way will have the best effect. It should be noted that when the stainless steel plate is processed with polishing equipment, the first step must be to sand the plate, and then the stainless steel plate can be placed in the grinding fluid. During this process, 8 sets of different thicknesses must be processed. The grinding head is used for grinding. The grinding process can also be said to be the treatment of the surface of the stainless steel plate. There is no technical content to say about this process. This step is mainly to remove the oxide layer on the surface of the stainless steel plate. After the above series of processing processes, the stainless steel plate is washed with water and then dried. As for the colored stainless steel mirror panels, the vacuum plating process is carried out on the basis of the mirror stainless steel plates. Nowadays, many high-end colored stainless steel mirror panels are plated on the surface of the stainless steel plates using vacuum ion plating technology. Some manufacturers will also provide pattern etching on mirror stainless steel plates to obtain a variety of mirror stainless steel plates with different styles.

After understanding the manufacturing process of mirror stainless steel plates, let’s understand the effect of mirror stainless steel plates as elevator decoration.

Mirror stainless steel plate is used in the decoration of elevator car panels. This is actually a composite surface stainless steel elevator decorative plate. It is composed of an inner base plate of cold-rolled steel plate and an outer stainless steel plate that are bonded with strong glue to form a conformable car plate. The production method is as follows: first, prepare materials, quantitatively cut the cold-rolled steel base plate and stainless steel panel according to the predetermined door panel size; create grooves, and use a groover to carve out a V-shape at the bending line of the base plate with a depth of only 0.3 mm. groove; after phosphating the substrate, remove the grease and rust on the surface; apply glue to the non-grooved surface of the substrate and the surface of the stainless steel; dry the glue and let the glue film on the two board surfaces dry to In a non-sticky state, the two panels are bonded with accessories and door panel reinforcements; finally, the door panels are reinforced with welding without affecting the appearance.