1. Environmental protection and hygiene: It eliminates red water, blue-green water, and hidden water problems. It has no odor and no harmful substances to precipitate to keep the water pure. It is lead-free and harmless to human health.

2. Wear resistance: The surface is beautiful, clean and bright, durable and scratch-free, never rust or break.

3. Low temperature resistance: stainless steel water pipes in kitchens and bathrooms, and faucet angle valves will never break.

4. Excellent thermal expansion performance and thermal insulation performance: Stainless steel pipe has slow thermal expansion and contraction and good thermal insulation performance.

5. Authoritative certification: The precipitation amount of stainless steel metal elements is lower than 5% of the standard value specified by WHO and European drinking water regulations.

304 stainless steel: It is a common material in stainless steel with a density of 7.93g/cm3. It is also called 18/8 stainless steel in the industry. It is resistant to high temperatures of 800 degrees and has the characteristics of good processing performance and high toughness. It is widely used in industry, furniture decoration industry, food and medical industry.

304 is a versatile stainless steel that is widely used to make equipment and parts that require good comprehensive properties (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 18% chromium and more than 8% nickel.

304 stainless steel plate specifications are 1000mm, 1220mm, 1250mm, 1500mm, 1800mm, 2000mm. Widths above 3mm are generally 1245mm, 1500mm, 1530mm, 1800mm, 2000mm, and the length is not limited. The normal length is 6000mm, which can be customized.

Physical properties: tensile strength ≥520mpa, conditional yield strength ≥205mpa, area shrinkage ≥60%, specific heat capacity 0.5kj*kg, expansion coefficient 18.4, resistivity 0.73, longitudinal elastic modulus 193, thermal conductivity 21.5, hardness ≤ 187hb, ≤90hrb, ≤200hv, elongation ≥40%, density 7.93g/cm3, temperature resistance 800°.


Precautions for using 304 stainless steel plate

After the installation of the 304 stainless steel plate is completed, the film needs to be peeled off in time. Afterwards, the steel plate must also be cleaned with special stainless steel detergent. The commonly used method is to wipe it with talc powder (Shuangfei powder) from beginning to end, and then wipe it with clean water as much as possible. It needs to be wiped clean. The reason for tearing off the film in time is to avoid glue left for a long time or severe glue aging.

After the 304 stainless steel plate is installed, the plastic film can be peeled off immediately to deal with surface problems in time to prevent pollutants or corrosive liquids from penetrating into the tape, leaving the surface in a wet and cold corrosion environment for a long time, causing serious corrosion to the surface.