Aluminum aluminum flux cored welding wire 2.0mm low temperature universal welding wire

Place of Origin:

Shanghai, China

Brand Name:

BAOBIN STEEL

Model Number:

TP-SW-11

Material:

Aluminum, silicon

Diameter:

1.6MM/2.0MM

Melting Point:

Normal

Weight:

1KG

Application:

Soldering

Flux Content:

Standerd

Item Name::

Aluminum flux cored welding wire

Material::

Aluminum, silicon

Feature::

welding

Length:

50cm

Color::

Silver

Package::

BOX

Market::

Global

Sample::

YES

Conductor Type:

Stranded

Low-temperature aluminum welding wire can weld almost all white metals, including aluminum, aluminum alloy, cast aluminum, aluminum-magnesium alloy and dissimilar welding between the above metals, even for white metals that have been severely corroded or contaminated by oil, even those that are considered irreparable Aluminum alloy can be repaired. Suitable for all-round welding by primary welding operators, only a small heating device is needed. The strength of the weld after welding is generally higher than the strength of the base metal itself. It is enough to know the gas welding operation.

Instructions for use of low temperature aluminum welding wire
One step: through physical cleaning, polish the surface.
Step 2: Heat the surface of the base metal at the welding place until the temperature reaches the working temperature of the welding wire 380℃-400℃, so that the welding wire can be melted to form a weld by the heat conduction of the base metal. Do not use flame to burn the welding wire. When the surface temperature of the material is sufficient, the welding wire can flow and penetrate into the metal capillary well.
Three steps: When repairing thinner aluminum, just heat the aluminum base material to a suitable working temperature, and then use the welding wire to friction and fuse to form a weld. Only use a metal brush to fill the weld with the molten wire to form a weld.

Pay attention to details
1. The surface of the base material must be cleaned. Clean and weld
2. The temperature of the base metal must reach 400℃, including the temperature of the base metal during the welding process, and the temperature can be high or low.
3. Taboo use flame to burn the welding wire deliberately. After the base metal temperature reaches 400℃, the welding wire will naturally melt by the heat conduction of the base metal.